Travis Industries DVS GSR Installation Instructions page 3

Dancing-fyre burner

Hide thumbs Also See for DVS GSR:

Installing the Air Deflector

If using the Traditional Log Set (SKU 94500991):

NOTE: Do not disable the light by removing the bulb and laying the housing flat in the firebox cavity.

Use tin snips to cut out the notch in the air deflector to allow it to fit around the light bracket.

b. Attach the air deflector to the rear of the firebox cavity, using the screws already in place. Insert the air

deflector with the screw holes facing up, so the notch fits around the light bracket, and then tilt it back so

the screw holes are aligned with the holes provided in the firebox.

Page 3 of 4

DVS GSR Dancing-Fyre Burner:

Installation Instructions

17601694.docx — 4/13/12

(SKU 96900103)