Table of Contents
Advertisement
Automatic redial
You can set the fax to automatically redial if the initial fax transmission fails. The machine
will redial on:
>
Line busy
>
No answer
>
Communication error
To set auto-redial:
1.
Using the Down arrow key, scroll to Menu and press Enter.
2.
Using the Down arrow key, scroll to Admin Setup and press Enter.
3.
Using the arrow keys and on-screen keypad, enter the Administrator password.
Highlight Done and press Enter.
4.
Using the Down arrow key, scroll to Fax Setup and press Enter.
5.
Using the Down arrow key, scroll to Fax Line Setup and press Enter.
6.
Press Enter to select the Redial Tries.
7.
Using the arrow keys, select the required number of redial attempts (between 0 and
10), then press Enter to confirm.
8.
Using the Down arrow key, scroll to Redial Interval and press Enter.
9.
Using the arrow keys, select the required redial interval (between 1 and 6 minutes),
then press Enter to confirm.
10.
Press the Left arrow key to exit the menu.
Reception mode
You can change the way your MFP handles incoming fax transmissions and telephone calls
(if you have a telephone handset connected) depending on your office requirements.
Choose from:
>
Fax
>
Manual
>
Tel/Fax
>
TAD
To change the reception mode:
1.
Using the Down arrow key, scroll to Menu and press Enter.
2.
Using the Down arrow key, scroll to Fax Menu Setup and press Enter.
3.
Press Enter to select Auto Receive.
4.
Using the arrow keys, select the required reception mode and press Enter.
5.
Press the Left arrow key to exit the menu.
Downloaded From ManualsPrinter.com Manuals
Configuring your machine... > 47
Advertisement
Table of Contents
