Remote Control - Gree GWH09TB-D3DNA1A Owner's Manual

How to Use the Wireless Remote Control
Parts and functions of the wireless remote control
Note: Be sure that there is no obstruction between the receiver and the remote control. Do not
drop or throw the remote control. Do not get any liquid on the remote control and avoid placing
it in direct sunlight or where it is very hot.

Remote control

CLOCK button
Press to set the "
will flash. After 5 seconds, the
value can be adjusted by pressing
the + or – button. If the button is
held for 2 seconds longer, the min-
utes will increase by 1 every 0.5
seconds. When the display is flash-
ing, press the "
again to accept the setting. When
the unit is first turned on, 12:00 is
the default time display, and the
clock symbol will be shown. When
the clock symbol is shown with a
time, it is the current time. If the
clock symbol is not displayed, it is
the timer time.
LIGHT
LIGHT button
Press when the unit is on or off to
set the light on or off. When the
unit is first turned on, Light On is
the default.
TURBO
TURBO button
While running in Cool or Heat
mode, press to turn the Turbo
function on or off. When the Turbo
function is on, the Turbo symbol
will be displayed. The symbol will
automatically disappear if the
mode or fan speed is changed.
"; the display
" (clock button)
6
X-FAN
X-FAN button
When the X-FAN button is pressed while
the unit is in the COOL or DRY mode,
the symbol " " is displayed and the
indoor fan will continue to run for 10
minutes in order to dry the indoor unit,
even after the unit is turned off. When
turned on for the first time, X-FAN OFF is
the default. X-FAN does not work in the
AUTO, FAN or HEAT modes.
+
+
( ) button
The preset temperature can be increased.
Press this button to increase the tempera-
ture. If the button is held down for two
seconds, the temperature will change
more quickly. When the button is
released, the temperature will be set and
the (°F) symbol will be displayed. The
temperature cannot be changed in Auto
mode, but the signal can still be sent by
pressing this button. The temperature in
Celsius can be set between 16 and 30;
the temperature in Fahrenheit Celsius can
be set between 61 and 86.
( ) button
The preset temperature can be decreased.
Press this button to lower the tempera-
ture. If the button is held down for two
seconds, the temperature will change
more quickly. When the button is
released, the temperature will be set and
the (°F) symbol will be displayed. The
temperature cannot be changed in Auto
mode, but the signal can still be sent by
pressing this button.
QUIET button
Press to set the Quiet status to Auto Quiet
mode (" " and "
displayed), Quiet mode ("
Quiet OFF (no display). When first turned
on, Quiet OFF is the default setting.
Note: The Quiet function cannot be used
when running in the Fan or Dry mode.
The fan speed is not available in Quiet
mode (" ").
" symbols are
" symbol) or