4/USING YOUR APPLIANCE
EN
Warning
The safety wire (green-yellow) is connected to the appliance's terminal
be connected to the ground lead of the electrical set-up.
In the case of connection to an electric wall socket, it must remain accessible after
installation.
The fuse in your set-up must be 16 amperes.
If the power cable is damaged, it must be replaced by the manufacturer, its After-Sales
Service Department or a similarly qualified person to avoid danger.
It must be possible to disconnect the appliance from the power
supply, either using a plug or by fitting a switch on the fixed
wiring system in accordance with installation rules.
Warning
We cannot be held responsible for any accident or incident
resulting from non-existent, defective or incorrect earthing.
If the electrical installation in your residence requires any
changes in order to hook up your appliance, call upon a
professional electrician.
If the oven malfunctions in any way, unplug the appliance or
remove the fuse corresponding to the sector where the oven is
hooked up.
10
and must