Braun BP 3510 Manual page 7

Measuring
For a reliable blood pressure measurement, make sure
that you hold the appliance at heart level. The position
sensor (A) will guide you to hold your arm in the right
position at heart level.
To open the cuff, press the release button (F) underneath
the cuff closure.
1. Place the monitor housing on the slim side of your bare
2 cm
2. Take hold of the cuff closure, pull out the cuff and
3. Press the red on/off button (B).
4. Put the hand with the appliance on the other upper
forearm.
insert the cuff closure in the monitor housing until it
locks into place. The cuff will adjust automatically to
length needed for your wrist.
arm as shown.
Slowly move the hand upward along the upper arm.
Watch the position sensor (A) and move your hand up
or down according to the direction of the arrow shown.
7