Braun BP 3510 Manual page 58

Measuring
For a reliable blood pressure measurement, make sure that you hold the
appliance at heart level. The position sensor will guide you to hold your
arm in the right position at heart level.
1. Place the monitor housing on the slim side
of your bare forearm.
2. Take hold of the cuff closure, pull out
the cuff and insert the cuff closure in the
monitor housing until it locks into place.
The cuff will adjust automatically to length
needed for your wrist.
3. Press the red on/off button.
4. Put the hand with the appliance on the
other upper arm as shown.
Slowly move the hand upward along
the upper arm.
Watch the position sensor and move
your hand up or down according to the
direction of the arrow shown.
5. The position sensor icon shown on the
left and a beep confirm that you have
reached the right measuring position.
The measurement will start automatically.