Locating A Disc By Name; List-Up - Sony XR-M500R Operating Instructions Manual

Erasing the disc memo
1
Press (SOURCE) repeatedly to select
"CD."
2
Press (MODE) repeatedly to select the CD
unit with the custom file function.
3
Press (MENU), then press M or m
repeatedly until "Name Del" appears.
4
Press (ENTER).
5
Press M or m repeatedly to select the disc
name you want to erase.
6
Press (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (MENU) twice.
The unit returns to normal CD play mode.
Notes
• When a personalised label is erased, the original
CD TEXT information will appear in the display.
• When you erase all of the disc names, "No Data"
appears in step 6.
30

Locating a disc by name

— List-up (For a CD unit with the custom
file function or an MD unit)
You can use this function for discs that have
been assigned a custom name. For more
information on disc memo names, refer to
"Labelling a CD" (page 29).
1
Press (LIST).
The name assigned to the current disc
appears in the display.
When you assign a disc memo name to a
CD TEXT disc, it takes priority over the
original CD TEXT information.
2
Press M (DISC +) or m (DISC –) repeatedly
until you find the desired disc.
3
Press (ENTER) to play the disc.
Notes
• The track names are not displayed during MD or
CD TEXT disc playback.
• If there are no discs in the magazine, "NO Disc"
appears in the display.
• If a disc has not been assigned a custom file,
"********" appears in the display.
• If the disc information has not been read by the
unit, "?" appears in the display. To load a disc,
first press the number button, then choose the
disc that has not been loaded.
• Some letters cannot be displayed during MD or
CD TEXT disc playback.