Locating A Disc By Name; List-Up; File Function Or An Md Unit) - Sony XR-C7500RX Operating Instructions Manual
Fm/mw/lw cassette car stereo
Hide thumbs
Also See for XR-C7500RX:
- Operating instructions manual (212 pages) ,
- Service manual (52 pages) ,
- Service manual (54 pages)
Table of Contents
Advertisement
Available languages
Available languages
Erasing the disc memo
1
Press (SOURCE) repeatedly to select
“CD.”
2
Press (MODE) repeatedly to select the CD
unit.
3
Press (MENU), then press either side of
(PRST/DISC) repeatedly until “Name Del”
appears.
4
Press (ENTER).
5
Press either side of (PRST/DISC)
repeatedly to select the disc name you
want to erase.
6
Press (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (MENU) twice.
The unit returns to normal CD playback
mode.
Notes
• When a personalised label is erased, the original
CD TEXT information will appear in the display.
• When you erase all of the disc names, “No Data”
appears in step 5.
Locating a disc by name
— List-up (For a CD unit with the custom
file function or an MD unit)
You can use this function for discs that have
been assigned a custom name. For more
information on disc names, refer to “Labelling
a CD” (page 33).
1
Press (LIST).
The name assigned to the current disc
appears in the display.
When you assign a disc memo label to a CD
TEXT disc, it takes priority over the original
CD TEXT information.
2
Press either side of (PRST/DISC)
repeatedly until you find the desired
disc.
To locate
preceding discs
To locate
succeeding discs
3
Press (ENTER) to play the disc.
Notes
• After a disc name has been displayed for five
seconds, the display returns to normal playback
mode. To turn off the display, press (LIST).
• The track names are not displayed during MD or
CD TEXT disc playback.
• If there are no discs in the magazine, “NO Disc”
appears in the display.
• If a disc has not been assigned a custom file,
“********” appears in the display.
• If the disc information has not been read by the
unit, “?” appears in the display. To load a disc,
first press the number button, then choose the
disc that has not been loaded.
• Some letters cannot be displayed (during MD or
CD TEXT disc playback).
Page 34
Advertisement
Chapters
Table of Contents
