Playing Your Messages - Nortel jAZZ X-6000 User Manual

You can change the speed of a message while playing it. For example, if your caller
spoke very fast, you can slow down the message.
While you are playing a message, press 2 1 to slow it down, or press 2 3 to speed it up.
You can increase the speed three times above normal, and decrease it two times below
normal.
You can change the volume of a message while playing it. For example, if you are
playing your messages in a noisy environment, you can increase the volume to hear
better. While you are logged in to CallPilot, all your messages play at the volume you set
unless you change the setting. The next time you log in, message volume will be
normal.
While you are playing a message, press 2 4 to play it softer, or press 2 6 to play it louder.
You can increase the volume three times above normal, and decrease it two times
below normal.
You can delete and restore (undelete) messages before, during, or after playing the
message. Deleted messages are removed from your mailbox at the end of your
CallPilot session. You cannot restore a message after you disconnect.
While at a message, press 7 6 to delete it and move to the next message.
Before disconnecting, return to the deleted message and press 7 6 to restore it.
Your played messages are automatically deleted on a schedule set by your
administrator. You can review auto-deleted messages and restore them. To restore an
auto-deleted message when prompted, press 7 6. Ask your administrator if this feature
is available to you.
12
2 2
1 3
2 2
4 6
7 6