[Sound] - NEC NP2000 User Manual

Setting Telecine Mode [Telecine]
Use 3:2 pull down correction to eliminate jitter and artifacts in video.
NOTE: This feature is available only when [Deinterlace] is turned on and an SDTV signal is selected.
Off ..................................... Turns off the Telecine mode.
On 2-2/2-3 Auto ......... Detects pull-down correction method.
2-2 On .................. Uses 2-2 pull-down correction method
2-3 On .................. Uses 2-3 pull-down correction method
Setting Contrast Enhancement [Contrast Enhancement]
This function provides improvement of contrast using a proprietary detail enhancement technology.
NOTE: This function is not available for Viewer or LAN.
Off ..................................... Turns off the Contrast Enhancement mode.
On ..................................... Turns on the Contrast Enhancement mode.
Split ................................... Turns on or off to show the effect of the Contrast Enhancement mode.
Adjust ................................ When the Contrast Enhancement mode is turned on or when [Split] is selected, you can adjust the

[Sound]

Controlling Sound [Volume/Bass/Treble/Balance]
Adjusts the volume, bass and treble level, left and right balance of the projector speaker and AUDIO OUT (Stereo Mini
Jack).
Enabling 3D Surround [3D Surround]
Turn on or off the 3D surround effect.
If the AUDIO OUT stereo mini jack of the projector is connected to an external equipment, adjusting the sound on the
external equipment can cause sound to be distorted or cracked, depending on the bass, treble or 3D Surround
adjustment. If this happnes, return the adjustments of the projector to the factory default (Bass:0, Treble: 0, 3D Sur-
round: Off).
Contrast Enhancement level.
79
6. Using On-Screen Menu