M ENTERING THE ADJUSTMENT MODE
1) Insert the short pin to the [REMOTE] jack.
2) While holding down the [SSB] and [CW] keys, turn ON the power.
While holding down, turn ON the power.
M MAIN ADJUSTMENT MENU
M QUITTING THE ADJUSTMENT MODE
1) Remove the short pin from the [REMOTE] jack.
2) Turn OFF the power, and then turn ON the power again.
<Adjustment main menu screen>
Transmitter adjustment (page 4-13)
CAUTION: When a TX adjustment item is selected,
Enters to the ID adjustment (page 4-15)
Reference signal adjustment (page 4-17)
Adjustment presets (page 4-17)
Adjusts the value for the item.
Stores the adjustment value.
Scope adjustment (page 4-15)
Receiver adjustment (page 4-15)
the transceiver automatically transmits.
3-3