Electrical Connection - Beem Samowar 2017 User Manual

Samowar
Hide thumbs Also See for Samowar 2017:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 19
EN
Select a location that does not al-
low children to reach the hot sur-
faces of the appliance.
The mains socket must be easily
accessible and allow fast discon-
nection in the event of an emer-
gency.
Do not lay tablecloths, cloths or
serviettes under the feet of the ap-
pliance, the appliance could slide
away.
Make sure that the mains cable
does not hang down and allow
someone to pull the appliance with
the cable.
The appliance may not be used or
stored outdoors.

Electrical connection

For safe and trouble-free operation of
the appliance, the following instruc-
tions on the electrical connection must
be be observed:
Before connecting the appliance,
compare the connection data (volt-
age and frequency) on the rating
plate with those of your mains
power supply. This data must cor-
respond in order to avoid damage
to the appliance. If in doubt, ask
your electrical appliance retailer.
The mains socket must be protect-
ed by at least a 16 A fuse
BEEM - Elements of Lifestyle
Ensure that the mains cable is
undamaged and is not laid over
sharp edges.
The mains cable must not be
pulled tightly, bent or come into
contact with hot surfaces.
Route the mains cable to prevent
risk of tripping.
Always unwind the mains lead
completely before connecting the
appliance to the plug socket.
The electrical safety of the appli-
ance is only assured when it is
connected to a properly installed
protective earth (PE) conductor
system. Connection to a mains
socket without PE conductor is
forbidden. If in doubt, the electri-
cal system must be checked by a
qualified electrician. The manufac-
turer assumes no liability for injury
or damage caused by a missing or
interrupted protective earth con-
ductor.
.
Samovar 2017
19

Advertisement

Table of Contents
loading

Table of Contents