Display Assembly - HP elitebook folio g1 Maintenance And Service Manual

Display assembly

Description
Display assembly, touch screen models:
FHD, UWVA
●
● UHD, UWVA
● FHD with HDC-IR, ultraslim
● UHD with HDC-IR, ultraslim
Display assembly, non-touch screen models:
● FHD, UWVA, ultraslim
FHD, UWVA, ultraslim, lightweight
●
NOTE: Lightweight models include a plastic bezel without edge-to-edge glass.
FHD, with HDC-IR, ultraslim
●
NOTE: Displays are only spared as full hinge-ups. Individual components are not spared.
Before removing the display assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the display assembly:
1. Remove the eight Phillips PM2.0×2.0 screws (1) that secure the display to the computer.
32 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 25).
23).
Spare part number
850916-001
850917-001
860207-001
860208-001
850918-001
855090-001
860206-001