Touchpad - HP elitebook folio g1 Maintenance And Service Manual

TouchPad

Description
TouchPad (includes cable)
Before removing the TouchPad, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the TouchPad:
1. Disconnect the TouchPad cable (1) from the system board.
2. Lift the cable from the adhesive that secures it to the battery (2).
3. Remove the adhesive from atop the TouchPad (3).
4. Remove the six Phillips PM2.0×2.0 broadhead screws (4) that secure the TouchPad to the computer, and
then remove the TouchPad from the computer (5).
Reverse the removal procedures to install the TouchPad.
Bottom cover on page
Battery on page 25).
23).
Component replacement procedures
Spare part number
850907-001
29