Battery
Description
4-cell, 38-Wh, 1.89-Ah, Li ion battery
Before disassembling the computer, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Remove the battery:
1.
Disconnect the battery cable from the system board (1).
2.
Remove the two Phillips PM1.6×4.0 screws (2) that secure the battery to the computer.
3.
Remove the six Phillips PM2.0×3.0 screws (3) that secure the battery to the computer.
4.
Lift the battery out of the computer (4).
Reverse this procedure to install the battery drive.
Bottom cover on page
23).
Spare part number
828226-005
Component replacement procedures
25