Paradyne Nortel Backbone Link Node Router 5030 Installation Instructions Manual page 8

3. Locate the T1/R1 connectors on the customer premises side of the punchdown
block or NID where the existing POTS wiring was removed in Step 3 on page 6.
Attach the jumper pair from P1/P2 labeled LINE in the POTS splitter to the T1/R1
connectors.
4. Snap the lever shut to
close the POTS splitter.
5. Use the 3/8 nut driver
on the closure screw to
securely close the housing.
8
Lever
Closure
Screw
97-15251