Preparing the POTS Splitter
Procedure
1. Unscrew the closure screw and open
the housing by pressing on the lever
on the right above the closure screw.
2. Remove the rubber grommet at the base
of the POTS splitter.
3. Make a small diagonal cut in the rubber
grommet to feed the wiring through.
4. Replace the rubber grommet at the
base of the POTS splitter.
P1
P2
Base of
POTS Splitter
Rubber
Grommet
P3
P4
4
Closure
Screw
97-15256
Lever
97-15437-01