Paradyne Nortel Backbone Link Node Router 5030 Installation Instructions Manual page 6

3. Disconnect the POTS wiring to the telephone from the T1/R1 connectors on the
customer premises side.
4. Feed the disconnected POTS wiring through the POTS splitter rubber grommet
access opening created at the base of the POTS splitter. Connect the wiring to the
right side labeled PHONE. Attach green to P3 and red to P4. Tighten both terminal
screws with a flat-blade screwdriver.
POTS Splitter
LINE
P1
PHONE
P2 P3 P4
Red
Green
To
Telephone
6
97-15257a