Applications; New Construction; Retrofit Replacement; Carrier Warranty - Carrier 52M Performance Series Product Data

APPLICATIONS

Whether you are designing a new structure or
replacing packaged terminal air conditioning units in
an existing building, Carrier will meet your needs.
Hotels and motels
S
Nursing homes and assisted living care
S
centers
Offices
S
Apartments
S
Single- -family dwellings
S
Home conversions and residential add- -ons
S

NEW CONSTRUCTION

The Carrier 52M
Conditioning (PTAC) unit is designed to meet the
needs of the architect, engineer, and contractor. For
unit installation, Carrier's expert support network will
assist in all applicable aspects of the construction
project, from preparing a budget to start- -up.
ADVANTAGES FOR NEW
CONSTRUCTION
Design Flexibility for the Architect/Engineer
Whisper- -quiet performance, indoors and out
S
No bulky duct system
S
No separate equipment room
S
No water towers or additional cooling
S
equipment
No complex match- -up of different HVAC
S
components
Less sensitivity to building orientation (sun,
S
wind, shade)
Optional architectural grille to permit custom
S
exterior appearance
Initial Cost Savings for the Building Owner
No expensive component HVAC system
S
purchase
No equipment
S
engineering staff
Two- -part delivery to minimize on- -site
S
damage
Weather- -protected wall sleeve that goes in
S
place during construction; chassis that slides
in place after construction
No seasonal changeover required for cooling
S
or heating - - units are self- -contained comfort
systems
Packaged Terminal
room or maintenance
Lower Operating Costs and Reliable Comfort
for The Occupant
Heat pump models offer substantial savings
S
over models with conventional electric
resistance heaters
Individual units allow tenants to choose the
S
degree of comfort and operating economy.
Rapid servicing reduces downtime: complete
S
chassis can be replaced in minutes without
disrupting other occupants.
Each unit operates independently of other
S
units in the building. No dependency by
building on central HVAC system.
RETROFIT/REPLACEMENT
Air
If you are replacing a unit in an existing wall sleeve,
your options include:
Replace the existing wall sleeve with a
S
Carrier Weather Lastt sleeve. See accessory
sleeve section for selecting the correct sleeve
for your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
Use an existing sleeve and exterior grille. The
S
Carrier 52M series PTAC will fit into:
— Most
sleeves/grilles, including GE, Amana,
Trane and Bryant, and NO accessory
retrofit kit is required.
— Replacing
products, 52P, 52C, 52S and Carrier
52B, and NO accessory retrofit kit is
required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
IMPORTANT: All non- -Carrier sleeve or exterior
grille retrofit applications need prior approval
from Carrier.
representative for assistance.

CARRIER WARRANTY

Carrier's five- -year limited warranty is the most
comprehensive in the industry. Carrier provides:
Full coverage for parts and labor for first
S
year.
Four additional years of full coverage on
S
sealed refrigeration system.
Limited second through fifth year coverage
S
on non- -refrigeration system parts.
major competitors'
older Carrier PTAC
Please contact your Carrier
wall