Carrier 52M Performance Series Product Data page 20

FIELD- -INSTALLED ACCESSORIES (CONT.)
SUBBASE
Part No.: SUBBASE- -230V- -15A
Part No.: SUBBASE- -230V- -20A
Part No.: SUBBASE- -230V- -30A
Part No.: SUBBASE- -265V- -15A
Part No.: SUBBASE- -265V- -20A
Part No.: SUBBASE- -265V- -30A
This decorative subbase supports the unit and is
available in three basic models: non- -electrical,
electrical, and hardwired.
A subbase (or leveling legs) is required for
installations where the wall sleeve extends 4 or more
inches into the room or the wall is less than 2 in.
thick. The minimum clearance between the bottom of
the sleeve and the floor is 3- -1/4 in., and the
maximum clearance is 5- -1/2 inches.
IMPORTANT: All standard cord- -connected
265- -v PTAC units
field- -installed electrical subbase accessory
per UL and NEC electrical codes.
All subbase models are pre- -assembled, mount to the
wall sleeve, and come with adjustable legs and side
skirting to provide a finished appearance.
Non- Electrical Subbase
The easy to install, non- -electrical subbase provides
mechanical support and requires no wiring.
Electrical Subbase
The electrical subbase has a factory- -installed
electrical junction box containing a receptacle for
corded packaged terminal air conditioner (PTAC)
units. The electrical subbase series offers models
from 230- -v, 15 amp up to 265- -v, 30 amp. Knockouts
are provided for power source connections.
will require a
Part No.: SUBBASE- -NON- -ELEC
Part No.: LEVELING- -LEGS
Non -- Electrical Subbase Assembly
Electrical Subbase Assembly
20