Kubota B2650 Operator's Manual page 42

22 OPERATING THE ENGINE
2. Place the PTO clutch lever in the
"OFF" position.
(1) PTO clutch lever
3. Place the speed set lever in "OFF"
position. [except B3350SU]
Place the speed control pedal in the
"NEUTRAL" position.
Place the range gear shift lever (L-M-
H) in the "NEUTRAL" position.
(1) Range gear shift lever (L-M-H)
(2) Speed set lever
[Except B3350SU]
(3) Speed control pedal
"ON" "ENGAGE"
"OFF" "DISENGAGE"
(A) "OFF"
(B) "ON"
(H) "HIGH"
(M) "MIDDLE"
(L) "LOW"
(N) "NEUTRAL POSITION"
A Depress the both brake pedals together, doing so the
speed set lever automatically returns to the off
position.
A By removing your foot from the speed control pedal, it
will allow the pedal to automatically return to the
neutral position.
4. Lock the loader control lever in the
"LOCK" position.
(1) Loader control lever
(2) Lock lever
5. Place the position control lever in the
"LOWEST" position.
[B2650/B3350 only]
(1) Position control lever
(A) "UNLOCK"
(B) "LOCK"
(A) "DOWN"