Horizon Fitness 3.2E User Manual page 9

Elite series

Hide thumbs Also See for 3.2E:

Table of Contents

AS SE M BLY S T E P 4

��

After handlebars are assembled they will rotate freely – be cautious. Until the

WARNING

machine is fully assembled, do not grab the handlebars for support.

��

NOTE: There is NO hardware for this

step. All hardware is pre-installed.

A) Remove PRE-ATTACHED BOLT &

WASHERS from CONSOLE MAST.

B) Slide LOWER HANDLEBAR onto

CONSOLE MAST and attach by re-

inserting PRE-ATTACHED BOLT &

WASHER.

C) Slide UPPER HANDLEBAR onto

LOWER HANDLEBAR and align

NOTCH with TAB making sure

handlebars are joined together

completely. Secure UPPER

HANDLEBAR to LOWER HANDLEBAR

using PRE-ATTACHED SET SCREWS.

D) Repeat on other side.

E) Snap the front and back HANDLEBAR

COVERS together onto the UPPER

HANDLE BARS. Note the position of

the snap tabs on the covers before

snapping into position.

F) Repeat on other side.

Table of Contents

Show Quick Links

Table of Contents

4.2e