Horizon Fitness 3.2E User Manual page 7

Elite series

Hide thumbs Also See for 3.2E:

User manual (19 pages)

Manual (2 pages)

Table Of Contents

Table of Contents

AS SE M BLY S T E P 1

HARDWARE BAG FOR STEP 1 CONTENTS :

��

3 . 2 E

A) Open HARDWARE BAG FOR STEP 1.

��

B) Slide TOP CAP over bottom of CONSOLE MAST.

��

C) Carefully pull the CONSOLE WIRES through the

CONSOLE MAST using the twist tie located inside the

��

CONSOLE MAST.

��

D) To attach CONSOLE MAST to the MAIN FRAME, insert

2 BOLTS (A), 2 SPRING WASHERS (B) and 2 ARC

��

WASHERS (C) into the 2 holes on the curved surface

of the CONSOLE MAST and 4 BOLTS (A), 4 SPRING

WASHERS (B) and 4 FLAT WASHERS (D) into the 4

side holes on the CONSOLE MAST.

3.2E. Steps A-D

4 . 2 E

��

A) Open HARDWARE BAG FOR STEP 1.

��

B) Slide CONSOLE MAST GROMMET over bottom of

��

CONSOLE MAST.

��

C) Carefully pull the CONSOLE WIRES through the

��

CONSOLE MAST using the twist tie located inside the

��

CONSOLE MAST.

��

D) To attach CONSOLE MAST to the MAIN FRAME, insert 2

BOLTS (A), 2 ARC WASHERS (B) and 2 FLAT WASHERS

CONSOLE MAST and 4 BOLTS (A), 4 SPRING WASHERS

��

(D) and 4 FLAT WASHERS (C) into the 4 side holes on

the CONSOLE MAST.

E) Insert the left TOP SIDE COVER, followed by the right

TOP SIDE COVER and snap them together.

F) Insert CUP HOLDER and secure it using SCREW (E) as

4.2E. Steps A-G

shown.

G) Slide CONSOLE MAST GROMMET down to seal the

console mast hole.

��

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

This manual is also suitable for:

4.2e

Horizon Fitness 3.2E User Manual page 7

Hide quick links:

Related Manuals for Horizon Fitness 3.2E

Related Products for Horizon Fitness 3.2E

This manual is also suitable for:

Table of Contents