Zoom 5360 Quick Start Manual page 5

Cable Modem Bottom Label:
3
When your Model 5360's Online light is solid green as discussed above, open your device's browser
and go to a website to test your wireless setup. If it works, congratulations! If it doesn't, please see
the Troubleshooting Tips in the User Manual.
Note: In the unlikely event that you want to change the unique SSID or the Security Key, please refer to
the User Manual on our website at www.zoomtel.com/5360manual
Read this only if you are connecting additional computers and/or other devices to
the cable modem/router's Ethernet/LAN ports
You can plug up to four computers, game consoles, or other Ethernet-capable devices into the cable modem's LAN
ports. For information about your specific device, please refer to the documentation that came with that
device. Follow the instructions on the other side of this Quick Start for each computer or other device.
1
If you connected the cable modem to a computer using a wired connection when setting up the cable
modem, unplug the computer now if you don't want it to stay connected to the cable modem.
2
To connect a computer or other Ethernet-capable device, plug one end of an Ethernet cable into any
available Ethernet (LAN 1, 2, 3, or 4) port on the cable modem and plug the other end of the Ethernet
cable into the Ethernet port of the additional device you want to connect to the cable modem. (If you
are connecting a hub or a switch, this is typically called an Uplink or Expansion port.)
3
If you are connecting a HomePlug adapter pair with one adapter plugged into the cable modem and
an AC outlet, and the other adapter plugged into a computer or game station and an AC outlet, make
those connections and then go to step 4.
4
Verify that your Internet connection is working. Open a Web browser on each computer that's using
your network and try to connect to a familiar Web address.
Congratulations! You have connected an additional device to the Internet. You can connect up to 4
Ethernet-capable devices to the cable modem/router, following the instructions above for each device and
starting at step 2 of this section. You can also connect wireless devices as discussed above.
Default Wireless Network Name/SSID
Default Wireless Password