Nortel 1140E User Manual page 23

When you do not want to use Bluetooth
If a Bluetooth headset is connected, and you want to use the wired
headset, you can switch between the two. It is not necessary to unpair or
disable Bluetooth.
To switch between a wired headset and Bluetooth:
1. Double-press the
box.
Left/Right
2. Press the
item.
Enter
3. Press the
A check mark indicates that the Bluetooth headset is used. Clear the
check mark to use a wired headset. On (o) by default.
To unpair a Bluetooth Headset:
1. Double-press the
box.
Right
2. Press the
3. Choose one of the following:
• If your headset is displayed in the Paired combo box, proceed to
step 5.
• If more than one device is paired, and your headset is not already
displayed in the Paired combo box, do the following:
a. Press the
Press the
b. Press the
Up/Down
headset.
c. Press the
box. Press the
Right
4. Press the
the UnPair Device item).
Enter
5. Press the
key to open the
navigation key to select the Use BT Headset
key to toggle this option on or off.
key to open the
navigation key to select the Paired: item.
Right
navigation key to select the Paired: combo box.
Enter
key to open edit mode.
Up/Down
navigation keys to open the list. Press the
navigations key to scroll in the list and highlight your
Enter
key to select the headset and close the combo
Enter
key to exit edit mode.
navigation key to select the UnPair button (next to
key.
Configuring options
3. Bluetooth Setup
3. Bluetooth Setup
dialog
dialog
23