Admin - D-Link DIR-822 User Manual

Section 4 - Configuration
This page will allow you to change the administrator (Admin) password and enable
remote management.
In the Management menu on the bar on the top of the page, click Admin.
Password: Enter a new password for the administrator account. You will need to
enter this password whenever you configure the router using a web
browser.
Enable Enables a challenge-response test to require users to type letters or
Graphical numbers from a distorted image displayed on the screen to prevent
Authentication online hackers and unauthorized users from gaining access to your
(CAPTCHA): router's network settings.
Enable HTTPS Check to enable HTTPS to connect to the router securely. Instead of
Server: using http://dlinkrouter.local./, you must use https://dlinkrouter.
local./ in order to connect to the router.
Enable Remote Remote management allows the DIR-822 to be configured from the
Management: Internet by a web browser. A password is still required to access the
web management interface.
Remote Admin The port number used to access the DIR-822 is used in the URL. Example:
Port: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DIR-822
and 8080 is the port used for the web management interface.
Note: If you enabled HTTPS Server and wish to access the router remotely
and securely, you must enter https:// at the beginning of the address.
Click Save when you are done.
To load, save, or reset settings, or reboot the router, click System and refer to page 67.
D-Link DIR-822 User Manual

Admin

66