System Log - D-Link DIR-822 User Manual

Section 4 - Configuration
The router keeps a running log of events. This log can be sent to a Syslog server, and
sent to your email address. In the Management menu on the bar on the top of the
page, click System Log.
Enable Logging Check this box to send the router logs to a SysLog Server. If this is
to Syslog disabled, there will be no other options on this page.
Server:
Syslog Server IP Enter the IP address for the Syslog server. If the Syslog server is
Address: connected to the router, select it from the drop-down menu to
automatically populate the field.
Enable Email If you want the logs to be automatically sent to an email address,
Notification: enable this option.
Enter the settings for your email account. These are obtained from
your email service provider.
Send When Log If email notification is enabled, this option will set the router to send
Full:
the log by email when the log is fully.
Send On This option can be enabled to send an email according to a
Schedule:
preconfigured schedule. See below.
Schedule: If you enable On Schedule is enabled, use the drop-down menu
to select the time schedule that the rule will be enabled on. The
schedule may be set to Always Enable, or you can create your own
schedules in the Schedules section. Refer to page 64 for more
information.
Click Save when you are done.
D-Link DIR-822 User Manual

System Log

65