Troubleshooting Guide - KitchenAid KRSC 9010 Instructions For Use Manual

Hide thumbs Also See for KRSC 9010:
Table of Contents

Advertisement

5019_715_02010_GB_IFU_SbS.qxp
12-03-2007
9:36
Pagina 19

Troubleshooting guide

Before contacting the Customer Care Centre...
Operation problems are often due to minor causes that can be found and fixed without using any tools.
Noises from the appliance are normal, since the fans and compressors for controlling its operation switch
on and off automatically.
Some noises can be reduced by:
• levelling the appliance and installing it on a flat surface
• separating and preventing contact of the appliance with the cabinets
• making sure the inside parts are correctly positioned
• making sure the bottles and containers are not touching each other
Some possible operation noises:
• hissing when the appliance is switched on the first time or after a long period.
• gurgling when the refrigerant enters the pipes.
• humming when the water valve or fan are activated.
• rattling when the compressor starts up or when the ice drips in the bucket.
• a sudden thud when the compressor starts up or stops.
When you hear these noises...
...your appliance is alive!!!
The appliance does not work:
• Is the power cable plugged into a socket powered with the right voltage?
• Have you checked the protection devices and fuses of your home's electrical system?
The motor seems to run too much:
• Is the condenser free of dust and fluff?
• Are the doors properly closed?
• Are the door seals intact?
• On hot days or when the room is warm, it is normal for the motor to run longer.
• If the appliance door has been left open for a long time or if large amounts of food have been
introduced, the motor will run longer in order to cool the inside of the appliance.
19

Advertisement

Table of Contents
loading

Table of Contents