Setting Up The Telephone - Nortel Norstar M7100 Quick Reference Manual

Setting up the telephone

ATTENTION Before attempting
Connecting the cords
to carry out any work on the
telephone, ensure that the line
cord is unplugged from the wall
socket.
To remove any of the cords,
squeeze the release latch on the
plug and gently pull the plug
from the socket.
Connect the handset cord to the
Connect to jack
jack labelled with the telephone
from distribution block
icon and route the cord as
shown.
Route the line cord through the
Connect to receiver
stand and connect the cord to
the telephone jack that is
marked with the jack icon.
Attach the stand using the slots
on the back of the telephone.
Once the above work is
complete, plug the line cord back
into its wall socket.
Page 4 Enterprise Edge M7100 Quick Reference Guide