Selectable Conferee Display And Disconnect - Nortel Meridian M3901 User Manual

Talk with more than one person

Selectable Conferee Display and Disconnect

You can view the list of active conferees by using the Conferee Selectable Display
Key and disconnect any party that has been added to the conference call. This
feature is not available on the Meridian SL-100 system.
To view active conferees:
/
Goodbye
To disconnect a conferee:
/
Goodbye
48
1. While on a conference call, press the
Conferee Selectable Display
LCD indicator turns on. With each key
press, the screen changes to show a
different active conferee.
Note: This action has no effect on the
displays of the other telephones involved in
the conference.
2. Press the Goodbye
the Conference Count Display returns.
The LCD indicator turns off.
1. While on a conference call, press the
Conferee Selectable Display
LCD indicator turns on. Continue to
press the key until the conferee you
want to delete appears on the screen.
2. Press the Line
conference call is established. The
selected conferee is disconnected from
the call.
Note: If there are additional conferees to
be disconnected, press the
Selectable Display
that is to be disconnected is displayed on
the screen.
3. Press the Goodbye
the Conference Count Display returns
and is updated to reflect the revised
total count of conferees. The LCD
indicator tuns off.
Key. The
Key. If configured,
Key. The
(DN) Key on which the
Conferee
Key until the conferee
Key. If configured