Preparation For Starting-Up - Medion S2218 User Manual

USA

Preparation for Starting-Up

Preparation for Starting-Up

To operate your laptop safety and ensure a long service life, you should
read the "Operational Safety" chapter at the beginning of this manual.
All operating software is already fully preinstalled on the laptop so there
is no need for you to install any more drivers and you can get started
right away.
− Connect the supplied AC adapter to the laptop. Next, connect the
power cable to the adapter and then plug it into a power outlet.
− Always hold the display fi rmly by the middle when folding it back,
adjusting the position and closing it. Failure to do so may damage
the display. Never use force to open the display.
− Open up the display to the desired position using your thumb and
fore-fi nger. The display should not be folded back by more than 120°.
When first operating your laptop please ensure that
the AC adapter is connected.
− Switch the laptop on by pressing the on/off button
laptop will now start and run through various steps.
The operating system will be loaded from the hard drive. The loading
process takes a little longer during the initial setup. Once all the
necessary data has been entered, the operating system will be set up.
The operating system is fully loaded once the Windows
appears.
NOTICE!
Data loss!
The initial installation may take a few minutes. Do not unplug
the laptop from the power source or switch it off during the
initial installation. This may adversely affect the installation.
− Do not switch off the laptop until after the installation
has been completed successfully and the startup screen
appears.
24
www.medionusa.com
. The
6
® start-up screen
AFTER SALES SUPPORT
+1 866 633 4660
USA