Specifications - JUKI MO-1000 Series Service Manual

SPECIFICaTIOnS

1
no. Items
1 Model name
2 Stitch choice
3 Sewing speed
4 Needle gauge
5 Overedge width
Knife width
6 Thread sliding segment (*1)
M/Ml
7 Stitch length
8 Differential feed
9 Needle bar stroke
10 Presser foot height
11 Feed dog height
12 Needle system (Japan)
Needle system (Overseas)
13 Number of needles
14 Number of threads to be used
15 Needle threader
16 Looper threader
17 Air pump
18 Liquid crystal display (*2)
19 Power switch
20 Light
21 Motor
22 Foot control
23 Driving system
24 Machine size
25 Machine weight
* 1: Only for Ml type
* 2: Only for M/Ml types
2-Needle, 2/3/4-Thread Overlock Sewing Machine (with differential feed
adjusting)
2 needles, 4 thread overlock
2 needles, 3 thread overlock
1 needle, 3 thread overlock
1 needle, 2 thread overlock
Up to 1,500 sti/min
Overlocking: 2.2 mm
2 needles, 4 thread: 5.0 to 9.0 mm
1 needle, 3 thread (right hand needle): 3.0 to 7.0 mm
1 needle, 3 thread (left hand needle): 5.0 to 9.0 mm
Roll hemming: 2.0 mm
2.5 to 6.5 mm
It is in synchronism with the lower knife from scale marks "2.5" to "5" of
the knife adjusting knob.
The amount of travel of the thread sliding segment can be finely adjust-
ed with the MTC knob.
1.0 to 4.0 mm (Standard 2.5 mm)
1：0.7 to 2
29.4 mm
4.8 mm to 5.0 mm
1.3 mm (This side end of the sub feed dog P = 2.5 mm; differential feed
ratio: 1:1)
ORGAN needle HA×1 # 11 (Standard) to # 14
SCHMETZ (130/705H 15X1H) # 80
Max. 2
Max. 4
Operated by the manual lever
Automatic threading by the air pump
Piston pump driven by the motor
Motor: DC 12V
Ml
Display section: 63.0 mm (W) × 17.5 mm (H)
Rocker switch
LED 5V x 2
100V : 100 to 120W
110/120V : 100 to 120W
220 to 240V : 100 to 130W
No-heat method (semi-conductor control type)
Timing belt drive
330 mm (W) × 280 mm (D) × 310 mm (H)
9 kg
1
–
Description
Rating 1,350±150 sti/min
–