adjustment Procedure
Checking items:
1 Throat plate
2 Cloth plate
3 Rear cover
* Check that the clearance between the cloth plate 2 and the throat
plate 1 is 0 to 0.5 mm (A) and 0 to 0.8 mm (B).
* Check that the clearance between the cloth plate 2 and the rear
cover 3 is 0.1 to 2.0 mm (C).
How to perform adjustment:
○ Loosen the setscrews (C) of the cloth plate hinge (D).
○ Move the cloth plate with the hinge (D) in its correct position.
Pass the safety switch cable above the hinge.
○ Retighten the setscrews (C).
Results of Improper adjustment
○ If there is no clearance between
○ Assemble the relevant parts
63
–
–
the cloth plate and the throat
plate and between the cloth
plate and the rear cover, ab-
normal noise can be produced
during operation.
taking care not to allow the
safety switch to be caught.