1-3. The base plate
If the sewing machine is tilted away from you, the sewing machine
will not be stabilized since the rear cover has a rounded surface.
It is recommended to place the sewing machine with the cloth plate
down on the table.
○ Loosen and remove the setscrews 1 .
○ The projections of the base plate are fitted in the holes in the
front and rear covers. Push up the base plate to remove the
projections from the holes.
1-4. The rear cover
○ Raise the presser bar lifting lever.
○ Loosen and remove the setscrews 1 .
○ Remove the rear cover.
Caution: If you remove the rear cover forcibly
by moving it to the right and left, the
claws between the rear cover and the
front cover can break.
1
1
5
–
–
Push the
base plate
Raise the presser
bar lifting lever.