Finishing Installation - Soleus Air TTWM1-10-01 Operating Instructions Manual

FINISHING INSTALLATION

Once the sleeve (sold separately) is installed, slide the air conditioner into wall sleeve.
NOTE: Sleeve & Grille installation instruction is not included in this manual.
1. Install the 1" x 1 1/2" x 84" long Stuff-Seal between
the wall-sleeve and the unit. A flat-bladed screwdriver
or putty knife is recommended.
84" Stuff-Seal
2. Assemble the Trim Frame by inserting the top and bottom pieces into side pieces and snapping into
place. Pull power cord through Trim Frame then slide over unit until flush with wall.
Trim Frame
Power Cord
* Actual product and parts may differ from images shown above.
8