AEG BSS 4817 Instruction Manual page 51

NOTE:
• Some of the mobile phone brands have an energy-saving mode. Deactivate
the energy-saving mode as it can otherwise result in problems during the data
transfer through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to stay activated in your
player. Observe the operation manual of your player.
• If a mobile phone on which you are playing music receives a call, the music will be
interrupted. Press the
by the loudspeaker. Speak into the microphone on the device or transfer the
conversation to your mobile phone. To do this, observe the overlay in the display
of the mobile phone. After you have ended the call, the devices are connected
to each other again and playback continues.
Operation
The device is equipped with multi functional buttons. For different functions press the
respective button briefly or press and hold.
On/Off (1)
• Turn on the loudspeaker by pressing the
light /Bluetooth indicator light (2) will start to blink.
NOTE : Automatic connection
If supported by your player (e.g. mobile phone), the devices will be connected
automatically. The prerequisite for this is:
• The devices were already connected with each other.
• Bluetooth is activated in your player.
• Keep the button (1) pressed for ca. 2 seconds to turn off the loudspeakers
again. The units are disconnected.
NOTE :
• To save the battery, switch off the speaker when not in use.
• If no suitable playback device is recognized in Bluetooth mode within
5 minutes, the device will automatically switch to standby.
/ button (6), to accept the call. The sound is replayed
button (1). The charging indicator
English
51