AEG BSS 4817 Instruction Manual page 50

English
50
If your playing device supports the A2DP profile (Advanced Audio Distribution Profile)
and has a music-player function, then you can also wirelessly transfer music to the de-
vice. The A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-
audio signals are wirelessly transferred between the playing device (source) and the
receiving device. To be able to operate the source by remote control, the player needs
to support the AVRCP profile (Audio Video Remote Control Profile).
Due to the different device manufacturers, models, and software versions, a full func-
tionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the devices.
1. Ensure, that the Bluetooth function is activated in your player (e.g. mobile phone).
For this, refer to the operation manual of your player.
2. Turn on the volume by briefly pressing the
start to flash rapidly after a short time. The device is now set to the pairing mode.
3. Chose the Bluetooth menu in your player and register the device in your player. For
this, refer to the operation manual of your player. The device "BSS 4817" will show
in your player as a selection.
4. Now enter the password "0000" in your player, depending on the device manufac-
turers, model, and software version.
If the playback device was recognized, the bluetooth indictator light (2) will blink slowly.
After successful registration, you can hear a signal and the bluetooth indictator light (2)
blink slowly.
NOTE:
• Depending on the device manufacturer, you need to perform the registration
(PAIRING) again to connect the devices.
• In the case of problems with the pairing of a playback device, deactivate the
WiFi-/ and mobile data function in your playback device.
• The Bluetooth compatibility cannot be ensured for devices (e.g. mobile phones)
getting released in the future.
• To ensure an optimal connection, make sure that the battery of your player is
completely charged.
button (1). The indicator light (2) will