Caution Labels - Kyocera FS-600 Installation Manual

Introduction
Ozone concentration

Caution labels

viii
CDRH regulations
The Center of Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
implemented regulations for laser products on August 2, 1976. These regulations apply to laser products
manufactured after August 1, 1976. Compliance is mandatory for products marketed in the United
States. A label indicating compliance with the CDRH regulations must be attached to laser products
marketed in the United States.
The printers generate ozone gas (O
unpleasant smell. To minimize concentration of ozone gas to less than 0.1 ppm, we recommend you not
to install the printer in a confined area where ventilation is blocked.
) which may concentrate in the place of installation and cause an
3