Cradlepoint IBR600 User Manual page 75

User Manual / IBR600/IBR650
• Enable Login Banner – Add the CLI banner to the
router's login page.
• Local Domain – The local domain is used as the
suffix for DNS entries of local hosts. This is tied to
the hostnames of DHCP clients as DHCP_HOSTNAME.
LOCAL_DOMAIN.
• System Identifier – This is a customizable identity
that will be used in router reporting and alerting. The
default value is the product name and the last three
characters of the MAC address of the router.
• Asset Identifier – This is a customizable string that
will be used in router reporting and alerting.
• Require HTTPS Connection – Check this box if
you want to encrypt all router administration
communication.
• Secure HTTPS Port – Enter the port number you want
to use. The default is 443.
• Enable SSH Server – When the router's SSH server is
enabled you may access the router's command line interface (CLI) using the standards-based SSH protocol.
Use the username "admin" and the standard system password to log in.
• SSH Server Port – Default: 22.
• Automatically Set System Identifier – This will automatically set the system ID to the name of the first
client that gets a DHCP lease. This feature cannot be used with email alerts but alerts can be sent to ECM.
GPS
If you have an attached device with GPS support, you can
enable a graphical view of your router's location, which
appears in STATUS > GPS. SIM-based models with GPS
support require that the SIM be inserted. Some carriers
disable GPS support in otherwise supported modems. If
you encounter issues with obtaining a fix, contact your
carrier and ensure that GPS is supported.
Enable GPS – Enable support for querying GPS information
from capable modems.
Send to Client(s)
• Enable this Server - Enables a local server to which
clients can connect and recieve GPS sentences.
• Server Name - Your server's name should include only
Aa-Zz, numerals, and '_'.
• Enable GPS server on LAN - Enables a server on the
LAN side of the firewall which will periodically send
GPS sentences to TCP connected clients.
• Enable GPS server on WAN - Enables a server on the WAN side of the firewall which will periodically send
GPS sentences to TCP connected clients.
• Port - Choose a port between 1 and 65535.
Send to Server(s)
©2015 Cradlepoint. All Rights Reserved.
11/5/15
| +1.855.813.3385 | cradlepoint.com
75