Cradlepoint IBR600 User Manual page 74

User Manual / IBR600/IBR650
• Secure HTTPS Port – Default: 8443.
NOTE: You can restrict remote access to only specified IP addresses in SECURITY > Zone Firewall > Remote
Access Restriction.
Allow Remote SSH Access – This will enable SSH access to the router from the Internet. It is only available when
SSH access is enabled in the Local Management tab. Some carriers block the remote SSH access ports. If a ping
to the router's WAN port does not work, it is unlikely that remote SSH access will work.
FEATURE LICENSES
Some Cradlepoint features may require a license. These
features are disabled by default. To obtain a feature
license, contact your Cradlepoint sales representative.
Once you have obtained the feature license file, upload
the file to enable the feature. A reboot is required after
uploading a feature license file.
SYSTEM CLOCK
Enabling NTP will tell the router to get its system time
from a remote server on the Internet. If you do not
enable NTP then the router time will be based on when
the router firmware was built, which is guaranteed to
be wrong. Whenever the Internet connection is re-
established and once a week thereafter the router will
ask the server for the current time so it can correct
itself.
You then have the option of selecting an NTP server and
adjusting the NTP server port. Select the NTP server
from the dropdown list. Any of the given NTP servers
will be sufficient unless, for example, you need to
synchronize your router's time with other devices in a
network.
• Time Zone – Select from a dropdown list. Setting your Time Zone is required to properly show time in your
router log.
• Daylight Savings Time – Select this checkbox if your location observes daylight saving time.
LOCAL MANAGEMENT
• Enable Internet Bounce Pages – Bounce pages show up in your web browser when the router is not
connected to the Internet. They inform you that you are not connected and try to explain why. If you disable
bounce pages then you will just get the usual browser timeout. In the normal case when the router is
connected to the Internet you don't see them at all.
• Reboot Count – Track number of router reboots.
©2015 Cradlepoint. All Rights Reserved.
11/5/15
| +1.855.813.3385 | cradlepoint.com
74