Manner Of Delivery; Adjusting The Seat Height - Vermeiren V100 Instruction Manual

3.2

Manner of delivery

The Vermeiren V100 shall be delivered with:
1 frame with arm supports, rear and front wheels (seat height of 500 mm - 19.69 in.)
1 pair footrests
Tools
Manual
Accessories
3.3

Adjusting the seat height

The Vermeiren V100 is adjustable in 3 seat heights by changing the wheels position. At each
height there is a different setting of the front and rear wheels.
L
WARNING:
The top hole of the axle plate is not intended for mounting the rear
axle - This hole is for mounting the drum brake.
Seat height
470 mm (18.50 in.)
500 mm (19.69 in.)
(Standard)
530 mm (20.87 in.)
Rear wheel
Hole 1 Both bushings above the castor stem housing
Hole 2 One bushings above, and one under the
castor stem housing
Hole 3 Both bushings under the castor stem housing
Table 2: Seat heights
Change the seat height according the following steps:
1.
Remove the rear wheels (see § 2.13).
2. Screw the axle bushings of the rear wheels from
the axle plate.
3. Assemble the axle bushings in the right hole of
the axle plate, see Table 2.
4. Check if the axle bushings are fastened well.
Page 19
Front wheel
N
V100
2010-11