Customer Acceptance - BenQ SX930 Service Manual

3.3 Customer Acceptance

1.0 SCOPE
This document establishes the general workmanship standards and functional
acceptance criteria for projector produced by BENQ.
2.0 PURPOSE
The purpose of this publication is to define a procedure for inspection of the
projector by means of a customer acceptance test, the method of evaluation of
defects and rules for specifying acceptance levels.
3.0 APPLICATION
The "Customer Acceptance Criteria" is applicable to the inspection of the projector,
completely packed and ready for dispatch to customers. Unless otherwise specified,
the customer acceptance inspection should be conducted at manufacturer's site.
4.0 DEFINITION
The "Customer Acceptance Criteria" is the document defining the process of
examining, testing or otherwise comparing the product with a given set of specified
technical, esthetic and workmanship requirements leading to an evaluation of the
"degree of fitness for use", including possible personal injury or property damage for
the use of the product.
5.0 CLASSIFICATION OF DEFECTS
The defects are grouped into the following classes:
5.1 Critical defect
A critical defect is a defect which judgment and experience indicate that there is
likely to result in hazardous or unsafe conditions for individuals using product.
5.2 Major defect
A major defect is a defect, other than critical one, is likely to result in failure, or
to reduce materially the usability of the product for its intended purpose.
5.3 Minor defect
35