Get Started; Charge The Parent Unit; Set Up The Baby Unit - Philips SCD505 User Manual

4 Get started

Charge the parent unit

Note
•
Make sure that the parent unit is disconnected
from the mains and turned off.
1
Remove the lid of the battery compartment.
2
Insert the supplied rechargeable batteries
with the correct polarity (+/-) as
indicated.
3
Reattach the lid.
4
Connect a supplied adapter to the parent
unit and to the mains socket to start
charging.
»
During charging, the battery indicator
flashes green.
Tip
•
The rechargeable batteries only reach the full
capacity after you charge them for four times.
• For the first 4 times, the charging time is 10 hours,
and the operating time is less than 24 hours.
•
The normal charging time is 8 hours, and the
normal operating time is 24 hours.
8 EN

Set up the baby unit

You can connect the baby unit to the mains or
insert non-rechargeable batteries to operate it.
For added reassurance, insert non-rechargeable
batteries to guarantee a backup in case of
power supply failure.
1
Before you connect the baby unit to
the mains socket, remove the lid of the
battery compartment.
2
Insert four non-rechargeable 1.5V R6 AA
batteries with the correct polarity (+/-) as
indicated.
3
Reattach the lid.
4
Connect a supplied adapter to the baby
unit and to the mains socket.