Famastil F-POWER Instruction Manual page 21

• For cutting discs, the flange is fitted
with the raised portion facing away from
the disc (PIC 3 - B).
Press in the spindle lock button and
05
rotate the spindle until it locks. Keeping
the lock button pressed in, tighten the
outer flange with the spanner provided
(PIC 4).
FITTING SANDING DISCS (NOT INCLUDED)
Use a sanding disc with the backing pad
for sanding with your angle grinder.
01 Disconnect the plug from the electric-
ity supply.
02 Remove the guard. Place the flange on
the spindle.
Place the backing pad on the spindle
03
and inner flange, ensuring it is correctly
located. (PIC 5).
04 Mount the fibre backed abrasive disc
on the backing pad. Fit the threaded
outer flange and tighten as explained
in "FITTING THE DISC".
HANDY HINTS
01 Hold your angle grinder firmly with one hand around the side handle and the other
around the body of your angle grinder (PIC 6).
A
FLANGE
ABRASIVE
DISC
B PIC 3
FLANGE
PIC 4
PIC 5
BACKING
PAD
21