L2Tp - D-Link DIR-808L User Manual

Section 3 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password.
My Internet Select L2TP (Username/Password) from the drop-down menu.
Connection is:
Enable Advanced Click on the checkbox to enable anti-phishing protection against
DNS Service: fraud and auto-correction of common URL typos.
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic IP.
L2TP IP Address: Enter the L2TP IP Address supplied by your ISP (Static only).
L2TP Subnet Enter the Subnet Mask supplied by your ISP (Static only).
Mask:
L2TP Gateway IP Enter the Gateway IP Address provided by your ISP.
Address:
L2TP Server IP Enter the Server IP Address provided by your ISP (optional).
Address:
Username: Enter your L2TP Username.
Password: Enter your L2TP Password and then retype the password in the
next box.
Reconnect Mode: Select either Always-on, On-Demand, or Manual.
Maximum Idle Enter a Maximum Idle Time during which the Internet connection
Time: is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
D-Link DIR-808L User Manual
Internet Setup

L2TP

29