Maintenance Work; Emptying The Dirt Tank (Attix 961-01) - Nilfisk-ALTO ATTIX 961-01 Operating Instructions Manual

ATTIX 9 STD
7.2

Maintenance work

7.2.1 Emptying the dirt tank
(ATTIX 961-01)
After emptying the tank: clean the
rim of the tank and the seals in the
intermediate ring and the upper
section of cleaner before refitting
them.
If the seal or groove is dirty or dam-
aged, the suction performance will
be reduced.
Before reinserting the suction hose:
clean the inlet fitting and hose col-
lar.
C
18
A
A
B
E
D
D
B B
1. Switch off the vacuum clean-
er and pull the mains plug
out of the socket.
2. Apply parking
(A) on
3. Open the retaining clamps
B
(B) and remove the upper
section of the vacuum clean-
er.
Tilting the dirt tank:
4. Pull the lever in the handle
(C) upwards and tilt the tank.
5. Tip out the collected dirt.
6. Dispose of the dirt in accord-
ance with legal regulations.
or
Removing the dirt tank:
4. Open the tank locks (D).
5. Use the handles (E) to lift the
E
tank out of the frame.
6. Tip out the collected dirt.
7. Dispose of the dirt in accord-
ance with legal regulations.
8. Place the empty tank in the
frame and close the locks
(D).
9. Attach the upper section of
the vacuum cleaner.
10. Close the retaining clamps
(B). Ensure that the retaining
clamps fit properly.
1)
Optional accessories / Option depending on model
brakes
both castors.