Maintenance; Maintenance Plan; Maintenance Work; Replacing The Waste Bag - Nilfisk-ALTO ATTIX 360-2M Operating Instructions Manual

ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english

7 Maintenance

7.1

Maintenance plan

7.2.1 Replacing the waste bag

7.2.2 Replacing the filter bag
7.2.3 Emptying dirt tank (ATTIX 3+5)
7.2.4 Emptying the dirt tank (ATTIX 7)
7.2.5 Replacing filter element
(ATTIX 360-2M/550-2M/751-2M)
7.2.6 Replacing filter element
(ATTIX 560-2MXC/761-2MXC)
7.2

Maintenance work

7.2.1 Replacing the waste
bag
When using ATTIX 360-2M/560-
2MXC/761-2MXC clean them tho-
roughly before replacing the waste
bag - see sections 4.5 bzw.4.6.
During the following work, ensu-
re that dust is not unnecessarily
spread around. Wear a P2 brea-
thing mask.
2 2
1 1
10
1 1
3
After finishing work
ATTIX 360-2M/550-2M/
1
560-2MXC:
1. Open the retaining clamps and
2. Carefully remove the waste bag
2
3. Close the waste bag connection
4. Close the waste bag using the
5. Dispose of the dirt in accordance
6. Insert a new filter bag into the
3
ATTIX 751-2M/761-2MXC:
1. Remove the upper section of
2. Open the retaining clamps (1)
3. Carefully remove the waste bag
4. Close the waste bag using the
5. Dispose of the dirt in accordance
6. Insert a new filter bag into the
As required
remove the upper section of the
cleaner from the dirt tank.
connection (1) from the inlet fit-
ting.
with the slide (2).
cable binder (3).
with legal regulations.
cleaned tank as described in the
instructions enclosed.
IMPORTANT: Press the filter bag
connection firmly on to the inlet
fitting.
cleaner from the dirt tank.
and remove the intermediate ring
(2) from the tank.
connection from the inlet fitting.
cable binder (3).
with legal regulations.
cleaned tank as described in the
instructions enclosed.
IMPORTANT: Press the filter bag
connection firmly on to the inlet
fitting.
1)
Option depending on model