Security Camera King EL2MPIR250L30X Operation Manual page 31

Parameter Function
Check the box here to enable this function and then click button
Target filter
set the target filter model in this scene. Click the button
selected target filter model.
2.2.3.6 Missing Object Detection
The missing object detection interface is shown as below. See Figure 2-17.
Please refer to the following sheet for detailed informaiton.
Parameter Function
Object type
You can select an object type here. The default setup is unknown.
supported
It is to set the min time between the missing object occurrence and alarm
Min last time
activation.
Figure 2-17
，you can
，you can remove
27