User Management; User Table; User Config - TP-Link T2600G-28TS User Manual

Status:
Tips:
After adding a global IPv6 address to your switch manually here, you can configure your PC's
global IPv6 address in the same subnet with the switch and login to the switch via its global IPv6
address.

4.2 User Management

User Management functions to configure the user name and password for users to log on to the
Web management page with a certain access level so as to protect the settings of the switch from
being randomly changed.
The User Management function can be implemented on User Table and User Config pages.

4.2.1 User Table

On this page you can view the information about the current users of the switch.
Choose the menu System→User Management→User Table to load the following page.

4.2.2 User Config

On this page you can configure the access level of the user to log on to the Web management
page. The switch provides two access levels: Guest and Admin. The guest only can view the
settings without the right to configure the switch; the admin can configure all the functions of the
switch. The Web management pages contained in this guide are subject to the admin's login without any
explanation.
Displays the status of the global address.
Normal: Indicates that the global address is normal.

Try: Indicates that the global address may be newly

configured.
Repeat: Indicates that the corresponding address is duplicate.

It is illegal to access the switch using this address.
Figure 4-10 User Table
25