Problem Solver - Hotpoint REM4H Use And Care Manual

Questions?
Use This Problem Solver
PROBLEM
OVEN WILL N~
COME ON
CONTROL PANEL
LIGHTED, YET OVEN
WILL NW START
FOODS ARE EITHER
OVERCOOKED OR
UNDERCOOKED
All these things are normal with your microwave oven:
Steam or vapor escaping from
around the door.
Light reflection around door or
outer case.
Dimming oven light and change
in blower sound may occur while
operating at power levels other
than high.
If you need more help.. call, toll free:
GE Answer Center"
800.626.2000
consumer information service
POSSIBLE CAUSE AND REMEDY
in your home maybe blown or the circuit breaker tripped. Replace fuse or reset
. A fuse
circuit breaker.
Unplug your microwave oven, then plug it back in.
Make sure 3-prong plug on oven is fully inserted into wdl receptacle.
Door not securely closed.
START must be touched after entering cooking selection.
. Another selection entered already in oven and CLEAR/OFF not touched to cancel it.
Make sure you have entered cooking time after touching TIME COOK 1 &2.
. CLEAR/OFF was touched accidentally. Reset cooking program and touch START.
Cooking times may vary because of starting food temperature, food density or amount
of foods in oven. Touch TIME COOK 1 & 2 and additional cooking time for completion.
Incorrect power level entered. Check cooking guide for recommended power level,
or changing levels during cooking if necessary.
Check cooking guide or recipe for instructions.
more than one food item. Check cooking guide time recommendations.
oven is operating.
Some TV-Radio interference
interference caused by other small
appliances and does not indicate a
problem with your oven.
28